There’s nothing like a fresh, nutrient-packed smoothie to start your day right. The Nutribullet is one of the most popular blenders on the market today, and for a good reason—it’s easy to use and makes quick work of blending fruits and vegetables into a delicious and healthy drink.
But with regular use, the Nutribullet blades can become dulled and not as effective. Here’s how to sharpen nutribullet blades so you can continue making your favorite smoothies without skipping a beat!
The Nutribullet is a great way to get your daily dose of fruits and vegetables, but if the blades aren’t sharp, the smoothies you make won’t be as effective. Dull blades can also damage the fruits and vegetables you’re blending, making your smoothies less healthy. So it’s important to sharpen nutribullet blades regularly to keep them in good condition.
Summary: To sharpen your Nutribullet blades without using glue, you’ll need a pair of pliers, some sandpaper or an emery board and a wooden block. Start by placing the blade between the jaws of your pliers, ensuring that each blade’s edges are held securely. Gently squeeze the pliers until you feel the blade starting to dig into the wooden block, then move it back and forth as if you were filing a piece of wood.
Required Materials:
- Nutribullet blender
- Sharpening stone or honing rod
- WD-40 or mineral oil
How to Sharpen Nutribullet Blades Step by Step Guide
Step 1: Disassemble the Blender:
Unplug the Nutribullet and remove the tall cup, blade attachment, and round bottom cap. Lay down a towel or other soft surface to protect yourself while disassembling your blender.
Step 2: Remove the Metal Bowl:
Remove the metal bowl from the blade attachment. There should be a small Allen wrench screw on the bottom of the metal bowl. Use the Allen wrench to loosen the screw and remove the metal bowl. You can also use a coin or screwdriver to remove the metal bowl from its base. Set it aside and put your Nutribullet on top of the towel you placed earlier.
Step 3: Remove the Bottom Cap:
Remove the bottom cap from the blade attachment. There should be a small Allen wrench screw on the bottom cap’s bottom. Use the Allen wrench to loosen the screw and remove the bottom cap. You can also use a coin or screwdriver to remove the bottom cap from its base. Using a flathead screwdriver, pry off the round cap at the bottom of your blender. It should come loose quickly and can then be set aside.
Step 4: Remove the Blade Assembly:
Remove the blade assembly from the blender by prying it off with a flathead screwdriver or coin. Then, set it aside with your Nutribullet on top of the towel you placed earlier.
Here Are Some Tips:
1. Unplug the Nutribullet and remove the tall cup, blade attachment, and round bottom cap.
2. Remove the metal bowl from the blade attachment. There should be a small Allen wrench screw on the bottom of the metal bowl. Use the Allen wrench to loosen the screw and remove the metal bowl.
3. Remove the bottom cap from the blade attachment. There should be a small Allen wrench screw on the bottom cap’s bottom. Use the Allen wrench to loosen screws and remove the bottom cap. You can also use a coin or screwdriver to remove it from its base.
4. Using a flathead screwdriver, pry off the round cap at the bottom of your blender. It should come loose easily and can then be set aside.
5. Remove the blade assembly from the blender by prying it off with a flathead screwdriver or coin. Set it aside with your Nutribullet on top of the towel you placed earlier.
Step 5: Clean the Blade Assembly:
Last but not least, you’ll need to clean the blade assembly. Remove any pieces of food from the blades with a paper towel before coating them with WD-40 or mineral oil. Wait 10 minutes for it to dry, wipe off excess oil, and use your me bolts to screw the blade assembly back into place on your Nutribullet. You can now reassemble your blender!
It can be not easy shifting how you think about nutrition if you’ve eaten unhealthily for most of your life. One important step is learning how to sharpen nutribullet blades so that this kitchen appliance will do its job properly and give you the nutrients you need!
The best way to approach healthy eating is by taking smaller steps. For example, instead of going cold turkey and only eating salads for a few months, you can include veggies in your breakfast omelet a couple of times a week. The more you shift how you eat now, the easier it will become to shift how you think about food!
Step 6: Dispose of Blade Assembly Oils:
WD-40 or mineral oil can be used to clean and lubricate your blender. These agents are meant to be disposed of, so they should not go down the sink drain. Instead, pour WD-40 or mineral oil into a waste container and set it aside for now.
Step 7: Fixing Blade Assembly:
Once you have cleaned the blade assembly, you will need to reattach it to the Nutribullet. To do this, line up the slots on the blade assembly with the posts on the blender and push down until it snaps into place. If it’s difficult to get the blade assembly to snap in, you may need to wiggle it. Once it’s in place, make sure the blade assembly is tight by using a screwdriver to tighten the screws.
You have now successfully sharpened your Nutribullet blades!
Insert your round bottom cap into the bottom hole of the blade assembly. If you have trouble, try using a pair of pliers to help secure it properly.
Step 8: Reassemble Your Blender:
Reassemble your blender by following the steps in reverse order. Make sure to tighten all screws securely. Once you’re done, plug in your Nutribullet and give it a test run! With your blade assembly properly lubricated, insert it back into the Nutribullet blender. Make sure your blade is level with the top of the container before pushing it through completely.
Step 9: Secure Metal Bowl:
Insert your metal bowl into its base and tighten using a coin or screwdriver. When it’s securely attached, give it one last tighten with pliers.
Step 10: Test Blade Assembly:
Before putting the blender back together, make sure your blade is turning as it should. If you have a faulty assembly, this is how to sharpen nutribullet blades so you can exchange them for a replacement.
Step 11: Reassemble Your Blender:
Reattach the tall cup and blade attachment onto the bottom of your blender. Tighten with a coin or screwdriver. When they’re securely attached, give them one final tighten with pliers.
Step 12: Test Your Smoothie Maker:
Now that your Nutribullet is all fixed up, it’s time to make a smoothie! Plugin the blender and blend until the mixture is smooth. If you notice any problems with your blade assembly spinning, unplug the blender and check to see if the screws are tight. If not, tighten them using a coin or screwdriver. There is one more thing you should know about sharpening nutribullet blades; if the assembly is still not working properly after trying these tips, you may need to replace it.
Once you’ve got everything sorted out, enjoy a healthy smoothie made with fresh ingredients!
The other thing you should consider when sharpening Nutribullet blades is how to dispose of the blade assembly oils. These agents can be harmful to the environment if poured down the sink drain, so it’s important to pour them into a waste container and set it aside for now.
Frequently Asked Question
How Do I Make My Blender Blades Sharper?
There are a few ways that you can make your blender blades sharper. One way is to use a sharpening stone. Another way is to use a file. You can also use a grinder if you have one. If you don’t have one, you can use a coffee grinder.
How Do I Sharpen My Blender Blades With A Sharpening Stone?
The easiest way to sharpen your blender blades is by using a sharpening stone. A sharpening stone can be used to make sure that your blade is straight and angled correctly. When you use the sharpening stone, you will need to add some water or oil to make it easier for you to sharpen your blades.
How Often Should You Replace Nutri Bullet Blade?
NutriBullet blade replacements are necessary every 6-12 months, depending on how often the blender is used. If you are a heavy user, the blades will need to be replaced more frequently.
Can You Sharpen Blender Blades with Ice?
Yes, you can sharpen blender blades with ice. You can use a sharpening stone or a file to do this. When you sharpen the blades with ice, it will help them stay sharper for longer.
Does Salt Sharpen Blender Blades?
Problem: I’ve been using my blender lately, and the blades don’t seem as sharp as they used to be.
Agitate: It can be frustrating when your blender’s blades aren’t performing how they used to. This can make it difficult to create the smooth textures you’re looking for.
Solution: Salt may be the answer. Believe it or not, salt can help sharpen your blender blades. You have to add a little bit of salt to your blend and watch as the blades start to cut through ingredients like butter easily.
How Long Did Your Nutri Bullet Last?
The Nutri Bullet blades should be replaced every 6-12 months, depending on how often the blender is used. If you are a heavy user, the blades will need to be replaced more frequently.
You Can check it Out to Sharpen Ninja Blender Blades
Conclusion
If you’re still struggling with how to sharpen nutribullet blades, the right tools and technique will make it a breeze. We’ve shared some simple tricks for sharpening your blade on an electric grinder or using metal files. Give them a try!
