The blender is a ubiquitous part of the modern kitchen. It’s one of those appliances that seem to have a million and one uses, from smoothies to soups to sauces. And while most blenders come with dull blades, there are ways to sharpen ninja blender blades so that they can do all of those things – and more – even better.
In this blog post, we will teach you how to sharpen ninja blender blades yourself in just a few simple steps. So don’t waste any time and get started today. First, we’ll tell you everything you need to know about sharpening ninja blender blades.
One of the most important reasons to sharpen ninja blender blades is because it keeps them clean. Dull blades tend to accumulate more residue and dirt, which can eventually cause them to break. On the other hand, Sharp blades can cut through all that build-up with ease, making them both safer and more efficient.
Additionally, sharp blades are better at blending ingredients evenly, which results in a smoother texture and a tastier final product. So if you’re looking to get the most out of your blender, make sure to sharpen ninja blender blades regularly.
Table of Contents
- 1 Required Materials
- 2 How to Sharpen Ninja Blender Blades Step by Step Guide
- 2.1 Step 1: Disconnect The Blander From The Electric Source:
- 2.2 Step 2: Remove The Jar From The Base:
- 2.3 Step 3: Take Apart The Blades From The Base:
- 2.4 Step 4: Clean The Blades With Great Care:
- 2.5 Step 5: Sharpen The Blades Of Ninja Blender:
- 2.6 Step 6: Check The Sharpness Of The Blades:
- 2.7 Step 7: Reassemble The Blender:
- 2.8 Step 8: Place The Blades And The Jar Back Into Place:
- 2.9 Step 9: Plug-In The Blender And Enjoy The Slicing Of Food:
- 3 Tips for Ninja Blender Blades
- 3.1 Tip 1: Following Manual For Assembling And Disassembling:
- 3.2 Tip 2: Avoid Over-Sharpening:
- 3.3 Tip 3: Sharpening the Blades Occasionally Is a Good Idea:
- 3.4 Tip 4: Know When to Replace the Blades:
- 3.5 Tip 5: Clean the Blade Up Before Putting It in the Jar Again:
- 3.6 Tip 6: Put the Gloves On:
- 3.7 Tip 7: Keep Blender Clean Before and After Use:
- 4 What Makes the Blades Blunt:
- 5 Not Cutting Hard Foods into Pieces:
- 6 Frequently Asked Question
- 7 Conclusions:
To Sharpen Ninja Blender Blades, You Will Need a Few Simple Materials. These Include:
- A sharpening stone
- A blade honing guide
- A coffee mug
- Dish soap
- Old clothes or an apron
The sharpening stone is probably the most important tool of the bunch, as it is what you will be used to sharpen the blades. Next, the blade honing guide helps keep the blades at the correct angle, while the coffee mug can be used as a makeshift water trough. And lastly, the dish soap will help lubricate the blades and prevent them from becoming scratched.
How to Sharpen Ninja Blender Blades Step by Step Guide
Step 1: Disconnect The Blander From The Electric Source:
The first and foremost thing that should be done is disconnect the power source from the blender. This includes unplugging it or turning off its circuit breaker for safety purposes.
Step 2: Remove The Jar From The Base:
After this, the jar should be removed from the blender’s base. First, ensure that both of them are cool to touch by allowing some time for cooling before proceeding further.
Step 3: Take Apart The Blades From The Base:
This should be done by taking out all the screws that hold them in place and then pulling everything off. The blades are usually held together with a bolt, which can be removed using an Allen wrench.
Step 4: Clean The Blades With Great Care:
Ensure that all the food particles present on the blades are removed before any further action is taken. Use a toothbrush because it has fine bristles and cleans inaccessible areas like under the screw well.
Step 5: Sharpen The Blades Of Ninja Blender:
For this, use a whetstone to sharpen the blades of the Ninja blender. This should be done by passing it over the blade in one direction only until you get a smooth cutting surface on it.
Step 6: Check The Sharpness Of The Blades:
After you are done with sharpening, check how well it has been done by cutting a piece of paper. This should be done by running the blade over the paper’s surface and checking how easily it can cut through it.
Step 7: Reassemble The Blender:
Once you are satisfied with how sharp the blades have become, reassemble them in their respective places. Ensure no loose parts or screws remain before using it for food purposes.
Step 8: Place The Blades And The Jar Back Into Place:
After this is done, return the blade to its original position and replace the jar. This should be done after ensuring that all the screws are in their respective places.
Step 9: Plug-In The Blender And Enjoy The Slicing Of Food:
This is how to sharpen Ninja blender blades step by step. This ensures that every part of the blade is sharpened, and it does not give too much stress to the motor or the blades.
The whole process of sharpening Ninja blender blades isn’t long and tedious. To do it, you just need patience, concentration, and, most importantly, your ninja blender with its jars and blades. You are following these steps to ensure how to keep your Ninja Blender in top shape without buying throwaway ones.
If you are still unsatisfied with how smoothly it slices through the food after sharpening your Ninja blender blades, then maybe it’s time for you to get a new one. How long your ninja blender will last depends on how well you take care of it and how frequently you sharpen Ninja blender blades.
Tips for Ninja Blender Blades
Tip 1: Following Manual For Assembling And Disassembling:
The manual that you get while how to assemble or how to disassemble Ninja blenders should be consulted for how to sharpen Ninja blender blades. The assembly order should be strictly followed because it ensures how correctly the individual parts are put together.
Tip 2: Avoid Over-Sharpening:
Sharpening the blades too much can cause them to lose their edge, so it is important to be careful while sharpening them. Do not apply too much pressure while sharpening, and make sure that you are doing it in the correct direction.
Tip 3: Sharpening the Blades Occasionally Is a Good Idea:
Sharpening the blades occasionally can intensify your blender’s performance. If you follow the tips I have given here, sharpening should not be a big issue.
Tip 4: Know When to Replace the Blades:
You should be able to know how long a blender blade can perform. If you have used your blender for commercial purposes, then it is obvious that the blades will wear down faster than usual. In this case, replace them at least once a year or earlier if required.
Tip 5: Clean the Blade Up Before Putting It in the Jar Again:
When you are done with the cleaning, always make it a point to dry the blade before putting it in the jar again. This is how you make sure that rust does not occur.
Tip 6: Put the Gloves On:
Always work with gloves on. This will help you to avoid serious cuts that are caused by the sharp blades of your blender.
Tip 7: Keep Blender Clean Before and After Use:
Another important factor to consider is how well you clean your blender. You should not let any kind of residue or particle remain in the jar after use, as that might damage the blade during blending.
What Makes the Blades Blunt:
The blades of a Ninja blender can become blunt after extended use. This is because the material that the blades are made of is not as hard as metal. There are several ways to sharpen the blades of a Ninja blender.
One way to sharpen the blades is to use a grinding stone. This can be done by placing the grinding stone on a flat surface and putting the blender’s blades on top of it. You then need to apply pressure to the blades with your hand while moving them back and forth across the grinding stone.
Another way to sharpen the blades is to use a sharpening stone. This can be done by placing the sharpening stone on a flat surface and putting the blender’s blades on top of it. You then need to apply pressure to the blades with your hand while moving them back and forth across the sharpening stone.
You can use one way to sharpen the blades in a vice grip. To do this, place the blade in the vice with how many teeth are facing up. Then tighten down so
Not Cutting Hard Foods into Pieces:
If your Ninja blender blades are not cutting hard foods into pieces, you may need to sharpen them. To do this, you will need a sharpening stone. First, wet the stone and then place it on a flat surface. Next, place the blade of the Ninja blender on the sharpening stone so that the beveled edge is pointing towards the ground. Use gentNext, use pressure, and move the blade back and forth across the sharpening stone.
Frequently Asked Question
Do Ninja Blades Need to Be Sharpened?
The Ninja blender blades do not need to be sharpened as often as the blades of a traditional blender. However, they will become blunt over time and need to be sharpened to continue producing the desired results. There are several ways to sharpen the blades, which are relatively easy to do.
Do Ice Cubes Sharpen Blender Blades?
No, ice cubes do not sharpen blender blades. However, using ice cubes in your Ninja blender can damage the blades.
You can check it out to Clean Ninja Blender Rubber Gasket
You might be thinking that a ninja blender blade doesn’t need sharpening. But, if you want to get the most out of your blades and make sure they last as long as possible, it is worth taking this step every once in a while.
It only takes minutes and can help ensure optimal performance from your machine! First, you have to remove the blade from its housing by unscrewing the lid on top of the unit. Then use a wet towel or cloth with some soap to wipe down both sides of each blade edge before putting them back into their proper place. Thanks for reading our post about how to sharpen ninja blender blades.